What you have is an 85" long axle with a 4,400 lb capacity. Since 4,400 lb axles are no longer being produced, you will need an axle with a higher capacity for a replacement. There are also no 4,400 lb spindles available. For a replacement I recommend the Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs # e45GR.
This axle is 86-1/2" long so it will stick out an additional 3/4" on each side but that won't be a problem. The spring seat measurement is also different.... view full answer...
It appears that your 2015 Dutchmen Aspen Trail 2810BHS came with a Valterra Flush Mount Water Inlet # A01-0168BKVP. This is a plastic construction and may explain why you are needing to replace it.
I recommend the RV City Water Flange # 372160-85-A-36A as it uses a lead free brass construction. The black flange is 3" which is slightly larger than the 2-3/4" flange on the Valterra so you may will need to seal the old holes and drill for the new holes. view full answer...
I'd be happy to help out!
If you can get me the dimensions of the seals you're needing to replace on your 2019 Dutchmen Aspen Trail Travel Trailer 2480 RBS I can make a recommendation for you, as we unfortunately don't have seal specs on trailers.
For example, the Rubber Top Lip Wiper Seal for RV Slide Out # SR23VR you were looking at is 30' long x 2-1/2" wide. If this matches what you currently have then you just need to make sure you get enough length to match your application!
Attached... view full answer...
Converting to LED lights on your Dutchmen Aspen Trail TT won't cause you an issue, especially since you're planning to switch all of them. If you know the bulb type you can replace them with LED bulbs like the # ARC93FR you were looking at. Make sure to match the bulb type and also match the color of the bulb to the color of the lens. If bulbs aren't available, you can replace the entire light with an LED light like the # RVSTLB60
I have attached links below to all of our LED replacement... view full answer...
The best option I have to replace the roof vent on a trailer where the model number is not know is with the MaxxAir UniMaxx Universal Replacement Lid part # MA00-335002 for smoke or part # MA00-335001 for white. These options will fit any standard trailer roof vent (14"-1/2" x 14-1/2" and 14" x 14").
If you are looking for a direct factory replacement, you'd need to know the model number which can be found under the screen. view full answer...
It's always good practice to change out both leaf springs of an axle for a consistent ride quality, and changing out all 4 on your tandem axle 2014 Aspen Trail 2650RBS will just go even further to help with a smooth towing experience.
According to my research your trailer should have 3,500 lb axles so you just need to measure from center eye to center eye with the spring unloaded and then choose the correct length spring. For 25-1/8" Long us part # e68SR or for 27" Long use part # e97SR. view full answer...
According to what I could find online about your part number it looks like the 63" Black part # LC404523 is what you're looking for in a replacement arm for your Carefree awning. view full answer...
The Camco RV Heating Wall Thermostat part # CAM09231 is a universal thermostat that works with single-stage heating systems. Therefore, if this is what you have in your 2013 Dutchmen Aspen Trail then yes it will work for you. However, if you have both a single stage heating and air conditioning system then you will want to use the Camco RV Single-Stage Heat and Cool Wall Thermostat part # CAM09221 instead. view full answer...
Go To Results